CTO carbon block water filter cartridge

10" CTO block filter cartridge 1.Material:coal/coconut carbon 2.precision:5,10 Micron 3.with good quality for activated

10" CTO carbon block water filter cartridge for activated

1.Brief account:

(1)Extruded activated carbon block filter cartridge with outside PP bonded non woven fabric can remove remaining chlorine and volatility organics effectively.And it can be made of different filter media such as coal carbon,fruit shell carbon,coconut shell carbon ect.removing the remaining chlorine,organics,ofor,smell,turbidity,sludge and suspending,particles.

(2)Filtration rate:1mic,5mic,10mic

(3)Standard length:10",20",10" BB,20" BB

(4)Category:coal carbon,coconut shell cabon,fruit shell carbon

(5)Feature:Sinter carbon block cartridge is made of the high quality activatedcarbon 30-60mesh which is sintered with high molecule material.With superfine absorbility,its efficient filtration is between 1-5mic,can remove color and over 98%remaining chlorine.

 

2.Features:

(1)1, 5, &10 Micron nominal filtration

(2)High chlorine taste and odor reduction-high chlorine adsorption capacity

(3)High dirt holding capacity extends service life

(4)Excellent for pre-filtration or pre-treatment in RO application

(5)Designed to be used in most standard-size housings

(6)Performance data based on manufacturer’s internal testing.Not performance certified or tested by NSF

(7)Reduces Chlorine/chloramines, VOCs, pesticides and taste / odor contaminants

(8)change cartridge every 6-10 months or upon substantial pressure reduction

 

3.Materials of construction:

 (1)Filter media:activated coal/coconut carbon

(2)End Caps:polypropylene

(3)Inner/outer Wraps:spunbonded polypropylene

(4)Netting:low density polyethylene

(5)Temperature rating:40 oF to 180oF(4.4oC to 82.2oC)

 

4.Specifications:

Model	Max. Dimensions	Micron Rating(nominal)	Initial .P(psi) Flow Rate(GPM)	Chlorine Taste & Odor Reduction @ Flow Rate(gpm)*1
CTO-10"	2-7/8" X9-3/4" (73mmX248mm)	5	7.0 psi @ 1 gpm (0. 26 bar @3.8 L/min)	>20,000 gallon @ 1 gpm >75,700 liters @ 3.8 L/min
CTO-20"	2-7/8" X20" (73mmX508mm)	5	3.7 psi @ 2 gpm (0.21 bar @7.6 L/min)	>45,000 gallon @ 1 gpm >170,300liters@ 3.8 L/min
CTO-10"BB	4-5/8" X9-3/4" (117mmX248mm)	5	3.0 psi @ 2 gpm (0.32 bar @7.6 L/min)	>50,000 gallon @ 1 gpm >189,300liters@ 3.8 L/min
CTO-20"BB	4-5/8" X20" (117mmX508mm)	5	3.7 psi @ 4 gpm (0.59 bar @15.1 L/min)	>150,000 gallon @ 4 gpm >567,800 liters @ 15.1 L/min

 

5.Genaeral installation/Operation/Maintenance Requirement

 

Note Flow direction of filter

Flus new cartridge with 5 gallon of water prior to use and check for leaks.If leaks occur,check tightness of tubing and fittings.If leads persist,discontinue usn and call your supporting dealer

Replace cartridge when rated capacity(2000 gallon chlorine removal) is reached,or when flow becomes too slow

Install in appliance with state and local laws and regulations.

6.Special notices:

The contanimants or other substances removed or reduced by this water treatment system and not necessarily in your water

CTO carbon block water filter cartridge